The appearance of the reverberation artefact depends on:
- The size of the two reflective surfaces
- The distance between the two reflective surfaces (long vs short path reverberation artefacts)
- And how much ultrasound energy is lost – dissipated or attenuated, between each re-reflection.
Long path reverberation artefact
When appearing deep to the pleural line these are known as A-lines.
The ultrasound appearance of this artefact is repetitive, horizontal, echogenic lines deep to the second of two large reflective surfaces, between which the ultrasound energy is reverberating. Most commonly this artefact appears deep to a flat surface behind which is an gas collection, typically a pneumothorax, free gas in the abdomen, or gas within a loop of bowel.
The image above shows how the ultrasound beam hits the highly reflective pleural surface and is reflected back to the transducer. The first return results in a true image of the pleural surface on the monitor. The beam however reflects back again off the transducer face and the cycle repeats. Subsequent horizontal lines are weaker and are artefacts. Their clarity depends on how good a reflective surface is encountered by the ultrasound beam.
An example of A-lines – Pneumothorax and Lung Point
The ultrasound clip above shows a lung point. The first bright horizontal line is the pleural surface with sliding lung on the left and pneumothorax on the right. The bright horizontal lines deep to the pleura are long path reverberation artefacts (or A-lines as they are known in the chest).
Alternate mechanism of long path reverberation artefact formation
Here reverberation occurs between two closer horizontal lines; a fascial plane and the pleural surface. Recurrent horizontal artifactual lines are therefore closer together.
Another example of A-lines
This is a pneumothorax. The pleural line can be seen horizontally just deep to the two ribs which are in cross section. The repetitive horizontal lines deep to this are caused by ultrasound reverberating between the facial planes and the pleural surface.
An example of long path reverberation artefact in bowel
These long path reverberation artefacts originate from gas within the bowel, and peristalsis can be seen. Reverberation is between the abdominal parietal peritoneum and gas within the bowel lumen.
Long path reverberation artefacts explained: